Handmade baby shoes

This has been my most challenging sewing attempt to date, so much so that I actually have not sewn anything since completing these little numbers. However, after seeing little Ruby wear these with her christening dress last week it was well worth the effort... and the swearing, and all the unpicking and re-sewing each shoe cost me. I especially loved my Mum's comment when I told her I had finished them, but that I had struggled quite a bit "Yes, I thought that might have been a bit over ambitious for you". 

Ah, hindsight - my old, dear friend. 

Note to self Holly: you are not yet 'intermediate' with your sewing ability, you would be best to stick to patterns that say 'beginner' or 'novice', or just return to the kitchen where things tend to run a little smoother (most of the time).

In saying all of this, the pattern for these shoes was brilliant and really easy to follow, and came with several different size options which I think I will make again in the future though for a slightly larger foot next time, so as not to be quite to fiddly. Also the fact I now know that 'fusible webbing' and 'fusible interface' are not, as I had assumed, the same thing I think the shoes will be much easier when they are not slightly sticking to each other as I try to sew them - major learning curve accomplished.

To make these shoes for yourself, the pattern can be purchased from Winter Peach Patterns on Etsy.

Happy stitching. 

xx

My baby's bunting

We recently had our beautiful Ruby Grace baptised, and celebrated with a small lunch back at our house. In her honour, I wanted to make something pretty for decoration and decide on some bunting to hang behind the food table, with the intention to then hang them in her nursery afterwards. I scoured the internet for a pattern that I liked, and after many slight variations this was how I got on.

For one 3 metre garland (2.3m of flags, with room at each end to tie) you will need:

• Cardboard triangle measuring 12.5cm along the base, and 17.5cm on the other two sides
• 7 different but complimentary fabrics
• 3 metres of inch wide bias tape

1. Wash, dry and press your fabrics and the bias tape.

2. Using your cardboard triangle template, cut six triangles (3 pairs) out of each of your fabrics.

 

3. Place two triangles of the same fabric face to face, and sew down the two long sides, from base to tip, leaving the base completely open.

4. Snip the tip off the end, and turn right side out. You may need to poke a pencil into the tip to get it to come to a nice point on the right side, then give it a really good iron. Trim any extra seams that poke out from base so you have a nice straight base edge.

5. Repeat with remaining pairs of triangles so you end up with 21 completed pendants.

6. Fold the bias tape in half and press well, then lie the tape out flat along the table (or floor if your table is shorter).

Leave a 35cm length of tape at each end (to be used later to tie up your bunting), then start placing the bases of the pendants corner to corner along the inner fold if the bias tape.

7. When you are happy with the order of your pendants, pin them into place and sew a seam all the way along the row, about 5mm from the edge of the tape. I actually sewed two seams one a few mm lower to make sure they are really secure.

That's it! I loved making these, and found it a really pleasant way to spend a Sunday "crafternoon", and they looked very pretty on the day.

xx

Carrot cake cookies

Just to prove I have not completely neglected my oven, here is a little taste of what we have been enjoying in our household of late. I love these cookies, but restrict myself to only baking them for very special occasions, and a friend's baby shower was the perfect excuse to bring them out... much to my husband's delight. This is a recipe my sister gave me, and I am sorry I can't credit it more than that (though if you knew my sister and her amazing baking that would be credit enough), and these little morsels are always a winner. There is just something about the fluffy cream cheese filling sandwiched between those soft, cakey cookies that is a real treat to devour.

Ingredients:

• 250gm softened butter
• 1 cup packed brown sugar
• 2 eggs, lightly beaten
• 1 ½ cups self raising flour
• ½ teaspoon all spice
• 1 teaspoon cinnamon
• 2 cups rolled oats
• 1 ½ cups grated carrot
• ½ cup sultanas
• ½ teaspoon baking powder
• ¼ cup chopped pecan nuts

Filling:

• 50gm butter, softened
• 75gm cream cheese
• 1 teaspoon orange zest
• 2/3 cup icing sugar (sifted) 

1. Preheat oven to 180°C, and line 3 trays with baking paper.
2. Beat butter and sugar until light and fluffy.
3. Add eggs, one at a time, and beat well.
4. Stir in sifted flour, baking powder, all spice and cinnamon.
5. Add all remaining ingredients and stir until well combined.
6. Cover and refrigerate for 30 minutes.
7. Roll into balls (tablespoon size balls for big cookies/ dessert spoon size for a smaller treat), and place an inch apart on lined baking tray.
8. Bake for 12-20 minutes, depending on size, or until lightly browned.
9. Cool completely on wire racks.
10. Combine all filling ingredients until fluffy. Add more icing sugar to taste if you need it.
11. Sandwich biscuits together with the frosting, and dust with icing sugar.

I did dessert spoon size this time, and got about 30 of the completed cookies (60 individual biscuits).

I hope you enjoy these as much as we do.

xx 

Fabric children's blocks

  

I love these squishy foam blocks as toys for little hands to play with. I have given something similar as gifts in the past and have now taken up making them myself. My initial attempt was not very successful, partly because I bought styrofoam cubes not cushion foam (will blame baby brain for that one) and partly because the instructions I had did not give any measurements, so my first, sad little 'Ruby' cube was unpicked and re-sewn I think 5 times and still looks a bit ragged but I am sure our little cherub won't mind. I have also started adding little bells into the blocks, which helps stimulate another of the wee ones senses when playing with them.

So here is how I go about throwing one of these cubes together. 

You will need:

• Foam cube (I use 10cm x 10cm, and the lovely chap at the foam shop cuts them to size for me)
• 6 different fabrics cut into 10cm x 10cm squares, or whatever size your foam is
• Needle and thread
• Fusible interface

1. Start by cutting your fabric squares. To personalise the block, I like to put the child's name on the blocks if I can (short names fit in one square, or I do 1 letter per square if 6 letters) so I trace their name onto fusible interface and cut it our of fabric to iron on. If you choose to do this, the fusible interface goes onto the back of the fabric so trace the letters inverted so they are backwards on the back of the fabric and the right way round on the right side (see below). I have also done ABC, numbers, and traced around cookie cutters for other shapes stick on to make the cube more interesting but you might just use lovely fabric and leave it plain.  
2. Once you have prepared your squares, start by taking two squares and lying them patterned sides together, and sew together along one edge, leaving about 8mm seam. (Don't worry that it won't fit with the block and squares the same size, it just makes for a nice snug fitting cover) 

3. Continue sewing the squares together to form a 'T' shape. 

4. Flip it over and give it a good press.

    5. Continue sewing the remaining sides together (inside out)  to form a cube

    leaving one side of one square unstitched. Pull the fabric out through the open side to right way out.

6. The next step is inserting the foam cube, and if you decide to put a bell in to the block do that
    now. I just use small embroidery scissors to cut a small slit about half an inch wide down halfway in
    to the cube. Then poke your finger in to stretch it out a bit and push a bell down into the hole. The    
    bells I had were only 12mm and the foam can dull the noise so I put in 3 of them which gave an
    effect I was happy with.

 

To put the foam in, just screw it up in a ball and shove it in, then just straighten the fabric around the block as it pops back into shape. 

7. To finish your cube, hand sew the last seam closed using a drawing stitch if you can do one, I can not so just did the best I could...

...and you are done.

Enjoy! 

xx